top of page
EDO Hybrid Units
EDO consists of 2 units:
The inverter unit on the top, it allows energy to be transformed generated by the photovoltaic system into useful energy for your home.
Store energy in the battery unit which is down below, and make it available when your habits require it.
Solid and Lasting Batteries at The Basis of Your Energy Independence
The batteries used for EDO are state of the art and use the most safe and reliable chemistry, lithium iron phosphate (LiFePo4).
This solution guarantees a long life of the batteries for domestic use and gives greater security than other technologies on the market.
Lithium iron phosphate does not contain any toxic components or heavy metals all for guarantee a completely green supply chain.
The battery unit is modular and can be connected up to 4 units for guarantee extreme autonomy of electricity consumption.
220V
Inerter 5kW
Battery 5.1kWh
220V
Inerter 5kW
Battery 10.2kWh
220V
Inerter 5kW
Battery 15.3kWh
220V
Inerter 5kW
Battery 20.4kWh
Integrated Solar + Battery System
The new EDO storage system can be used as integrated solar + battery system for new photovoltaic plants. The E-CASA 3.6 / 5.0 unit in fact is a hybrid unit that also allows the connection of the solar strings. This reduces the number of components installed for greater system reliability and maximum energy efficiency.
EDO system is very compact and allows installation of all the electrical system components, photovoltaic and storage, in a single point minimizing the space occupied in the technical room of the house.
MORNING:
peak consumption and low solar production.
EDO supplies the missing energy with the residual energy accumulated the previous day.
DAYTIME:
low and non-constant consumption with high solar production.
EDO accumulates excess energy produced by solar plant and makes it available for any immediate peaks or stores it for evening / night consumption.
EVENING:
high consumption for several hours and no solar production.
EDO makes available the energy accumulated during the day, also supporting the peaks due to the use of all the utilities by the family and allows to reduce consumption from the grid even for the night.
Self Consume:
The energy generated by the solar panels will be used in the following order: Feed the home loads; Charge the battery and then, feed into the grid.
When the sun is off, the load will be supported by battery to enhance self consumption. If the power supply from the batteries is not sufficient, the grid will support the load demand.
Bat Priority:
Under this mode, the battery is only used as a backup power supply when the grid fails and as long as the grid works, the batteries won’t be used to power the loads. The battery will get charged with the power generated by the PV system or from the grid.
Peak Shift:
This mode is designed for time-use mode customer. The customer is able to set up the charging/discharging time & power via inverter screen or APP.
Maximum Installation Flexibility and Integration Also On Existing Plants
For New PV Plant
The new EDO storage system can be used as integrated solar + battery system for new
photovoltaic plants. The E-CASA 3.6 / 5.0 unit in fact is a hybrid unit that also allows the connection of the solar strings.
This reduces the number of components installed for greater system reliability and
maximum energy efficiency. EDO system is very compact and allows installation of all
the electrical system components,photovoltaic and storage, in a single point minimizing the space occupied in the technical room of the house.
For Existing PV Plants
The new EDO storage system is a reliable, flexible and simple Solution to install.
EDO allows you to integrate a storage system also on existing solar plant and thanks to the high DC / AC ratio it adapts to all systems of different installed power.
EDO can be used maintaining the existing photovoltaic inverter coupling the storage in AC, therefore with none necessary modification of the existing system and maximum simplicity of installation.
Monitoring Software
EDO connects to the home network via wifi , thanks to the SmartESS app you have the opportunity to quickly and immediately view the operating status and changes in the data from the storage system in real time.
Effective 24-hour monitoring of the following functions:
- Battery charge level
- Self-consumption capacity
- Production of the photovoltaic system
- Control on Sale / Purchase of electricit to the grid
- Energy consumption of loads
- Charging / discharging scenarios
- Alarms or faults
With the app you can monitor production and energy consumption of your home in real time. Set your preferences to optimize your energy independence, the protection against blackouts or energy savings.
Thanks to instant alerts and access to distance, you can control your plant wherever you are.
bottom of page